Bosch LSU4.2 5-wire, wide-band O2 sensor ( Click for more details )
Item Code: 3273737
6-ft. long, mini to stripped-and-tinned, matching LM-1 analog output spcifications ( Click for more details )
Item Code: 32716140
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. A must if you don't have or don't want to install a bung for testing. ( Click for more details )
Item Code: 3273728
52mm, 8-18 AFR needle gauge driven by LM-1 analog output. **Requires "Analog Output Cable" Not included** ( Click for more details )
Item Code: 32716143
Includes an integrated circuit for converting tach or inductive clamp output to a clean analog signal that can be logged by the LM-1. The cable can be calibrated to the characteristics of your engine through a simple setup routine. **Inductive Clamp ( Click for more details )
Item Code: 3273726
-Inductive Clamp Accessory for LM-2, DL-32, LMA-3, and RPM Converter. -Simply clamp on to one spark plug wire to log RPM. -Cable is 6 feet in length. Kit includes: Inductive Clamp and LM-2 ... ( Click for more details )
Item Code: 3273834
To minimize the effects of noise coupling with the extended-length sensor cable, Innovate recommends minimizing the length of the power-supply cable. <2’ is ideal. Noise coupling may be present if the bar graph is flickering. Excessive coupling will ( Click for more details )
Item Code: 3273739
The AuxBox attaches to the auxiliary input of the LM-1 and allows a user to log and analyze 5 critical engine metrics in addition to the air/fuel ratio native on the LM-1. The AuxBox makes the LM-1 into a complete tuning kit, allowing the user to ... ( Click for more details )
Item Code: 3273742
***NOT FOR USE WITH NEW LM-2*** For use only with the RPM Converter (LMA-2), AuxBox (LMA-3), or the DL-32 (6ft.) ( Click for more details )
Item Code: 3273727
The Bosch LSU4.2 wide-band O2 sensor (shipped as part of the LM-1 kit) is rated to operate at an exhaust gas temperature of < 1300 degrees (F), and a sensor housing temperature of < 900 degrees (measured at the bung) for maximum accuracy and ... ( Click for more details )
Item Code: 3273729
Wall adapter for LM-1 meter only. ( Click for more details )
Item Code: 3273732
Adapter for computers without Serial ports. This cable will convert Serial to USB. Software included. ( Click for more details )
Item Code: 3273733
Bung & Plug Kit ( Click for more details )
Item Code: 3273736
( Click for more details )
Item Code: 3273738
Item Code: 3273740
*Sensor NOT included* The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 ... ( Click for more details )
Item Code: 3273744
Accessory for LM-1 Only! Not needed with LC-1. The latest model Autronic ECU does not require this cable. To better interface with Autronics’ ECUs, we’ve developed a custom interface cable. This is essentially a modified analog output ... ( Click for more details )
Item Code: 3273745
The Serial Program Cable will allow you to connect any of the following devices to your PC. (LC-1, XD-1, LMA-3) ( Click for more details )
Item Code: 3273746
Terminator Plug for use with XD-1, LMA-3, LC-1, and ST-12. ( Click for more details )
Item Code: 3273750
P/N: 3760 is also needed to connect the LM-1 to the XD-1. ( Click for more details )
Item Code: 3273759
This custom cable will allow you to connect and/or daisy chain the following products: XD-1, LC-1, LMA-3, ST-12. Also used to connect the LM-1 to the XD-1. ( Click for more details )
Item Code: 3273760
Extended Bung & Plug (1 inch) Mild Steel ( Click for more details )
Item Code: 3273764
*Bosch Wideband Sensor Included* The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 ( Click for more details )
Item Code: 3273769
The Innovate Motorsports’ SuperTune-12 is a complete data acquisition system for advanced engine tuning. The system is anchored by Innovate’s award-winning digital wideband Air/Fuel Ratio technology, but also includes flexible sensors for RPM, MAP, ... ( Click for more details )
Item Code: 3273775
**ONLY FOR USE WITH ST-12 SYSTEM** ST-12 supports up to (12) LC1-ST wideband controllers. The specialized cables are functionally identical to the standard LC-1 cables, except they are 18 ft. long, terminated with a single ... ( Click for more details )
Item Code: 3273776
**** Does NOT include LC-1 or Sensor, sold separately **** The Innovate XD-16, a 16-in-1 version of the popular XD-1, 52mm (2 1/16") round dash-mountable gauge. The XD-16 features programmable LED colors and remote control ... ( Click for more details )
Item Code: 3273780
**** Complete kit including XD-16 "16-in-1" Universal Gauge, LC-1 and O2 Sensor **** The Innovate XD-16, a 16-in-1 version of the popular XD-1, 52mm (2 1/16") round dash-mountable gauge. The XD-16 features programmable LED ... ( Click for more details )
Item Code: 3273781
The DL-32 is a complete system for advanced engine tuning. The system is anchored by Innovate Motorsports' award-winning digital wideband Air/Fuel Ratio technology, but also includes flexible sensors for RPM, MAP, Temperature, Duty Cycle, and analog ( Click for more details )
Item Code: 3273782
(586) 294-4404
