(586)294-4404

OPEN 9:00 to 5:00 PM EST (Mon-Fri)

  • SKU: 672-FI114212

Racetronix 220 lb-hr Siemens Low Impedance EV1 Fuel Injector

$134.99
Shipping calculated at checkout.

RACETRONIX FI114212 - 220 lb/hr Low-Impedance Fuel Injector


TYPICAL APPLICATIONS:

  • High-performance aftermarket

TECHNICAL INFORMATION

All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), peak and hold drivers.

Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This low-impedance injector is designed to work with peak and hold injector drivers typically found in aftermarket ECM/PCMs as well as dedicated injector driver modules sold by Racetronix.

ADDITIONAL INFORMATION

This newly released injector from Continental (Siemens) is based on their CNG design with modifications better suited for use with gas and alcohol fuels. This injector flows 227.7 lb/hr using test gas. The Minitimer injector connector (sometimes referred to as 'EV1 square') can be found on many late-model G.M. (TPI, LT1, LS1, LS6) motors as well as being standard equipment on most aftermarket PCM harnesses.

INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)

Contact Us Now to Speak with one of our Professionals in High Performance!
PHONE: (586) 294-4404
FACEBOOK: @FullThrottleSpeed
E-MAIL: steve@fullthrottlespeed.com
BACK TO TOP
Promo box
info info