(586)294-4404

OPEN 9:00 to 5:00 PM EST (Mon-Fri)

BOSCH 210LB EV1 HIGH IMPEDANCE FUEL INJECTOR SET FOR 8 CYLINDER APPLICATION
BOSCH 210LB EV1 HIGH IMPEDANCE FUEL INJECTOR SET FOR 8 CYLINDER APPLICATION
BOSCH 210LB EV1 HIGH IMPEDANCE FUEL INJECTOR SET FOR 8 CYLINDER APPLICATION
  • SKU: 001-0280158829

BOSCH 210LB EV1 HIGH IMPEDANCE FUEL INJECTOR SET FOR 8 CYLINDER APPLICATION

$669.99
Shipping calculated at checkout.
Genuine Authentic Bosch High Impedance Fuel Injectors 210lbs or 2200cc at 43.5 PSI
Uses a common EV1 connector. Common use is for GM, Ford, etc.
Bosch Part # 0280158829
 
DETAILS:
  • Item name: Bosch High Impedance Fuel Injector
  • Part Brand: BOSCH
  • BOSCH Number: 0280158829
  • EAN Number: 4047024439795
  • Remark: These injectors have NO SCREEN and MUST have a fine, 40 micron or finer pre-filter near the fuel rail! These Bosch injectors are NOT compatible with gas/petrol with MTBE content, such as VP Q16 and VP Import fuels or other MTBEoxygenated fuels. This is not a problem in the vast majority of race and pump gas/petrol applications.
  • Specifications:Genuine, reliable, new Bosch Injectors
  • Excellent response characteristics
  • Robust Design
  • High Impedance
  • Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85, CNG
  • Unacceptable Fuels: Gas/Petrol containing MTBE, specifically VP Q16 and VP Import or other MTBE oxygenated fuels
  • Coil Resistance: 9.1 Ohms / Low Impedance
  • Dead Time: 0.45ms at 14 volts
  • Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 2200 cc/min = 210 lb/hr
  • Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2550 cc/min = 240 lb/hr
  • Static Flow Rate @ 78.5 PSI ( 500kPa ) w/Gas: 2865 cc/min = 273 lb/hr
  • Static Flow Rate @ 88 PSI ( 600kPa ) w/Gas: 3155 cc/min = 300 lb/hr
  • Static Flow Rate @ 101.5PSI ( 700kPa ) w/Gas: 3350 cc/min = 320 lb/hr
  • Connector: Denso
  • Injector Length: O-Ring to O-Ring: 1.5. / 37.5 mm
  • Injector Body Diameter: 16mm
  • O-Ring: 14.5mm Viton

We also have billet hats to adapt these to taller rail setups, or to drop them into stock truck rails. Please select the IHAK-01 for the is the "small hat" setup that is just under 1 inch.We also have taller billet hats to adapt a 210 to ls3 height to ls2 or truck height, and it will take a truck height or ls2 height injector to LS1 or the tallest height.

Contact Us Now to Speak with one of our Professionals in High Performance!
PHONE: (586) 294-4404
FACEBOOK: @FullThrottleSpeed
E-MAIL: steve@fullthrottlespeed.com

RELATED PRODUCTS

RECENTLY VIEWED PRODUCTS

BACK TO TOP