No Products in the Cart
Holley’s HP™ In-Line Billet Fuel Pumps are designed to be the perfect companion to your carbureted or fuel injected race car, off-road truck or any engine needing fuel! The HP™ fuel pumps feature OEM gerotor technology which yields lightweight, quiet operation and 100,000+ mile durability in a cost effective, attractive package. HP™ fuel pumps are Race gas, E-85 and diesel compatible and can be used in racing applications with 18.5 volt charging systems up to 80 psi.
|Free Flow GPH||100|
|Free Flow LPH||379|
|Inlet Size||8 AN O-Ring - 3/4-16 SAE|
|Outlet Size||8 AN O-Ring - 3/4-16 SAE|
|Product Type||Fuel Pump|
|Pump Body Color||Black Anodized|
*Pump gas compatible for intermittent or under 90 degree ambient temperature use
Pump gas use recommendations:
• This pump is compatible with pump gas, but is not recommended for street driven vehicles where the ambient temperature is regularly above 90 degrees
• For street driven vehicles in high temps with pump gas, Holley recommends part numbers 12-600 or 12-800 for optimum hot fuel handling
• Proper fuel system engineering is critical for maximum performance. Please see Holley Fuel System Chart for information about proper installation of your fuel system.
Will work with E-85 and Diesel!
These pumps do not have an internal bypass. A bypass style regulator and return line are required.
NOT FOR USE WITH METHANOL!
This pump is not designed to use a standard conical seat style union in the inlet or outlet of the pump. Example:Part # AT981508ERL. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as :Part # AT985008ERL.