Low Impedance 160 LB/HR Fuel Injectors
This new injector uses the same technology as the Delphi Disc injectors. This injector exhibits excellent street manners given its size.
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur
- Longer service life
- High-speed disc action allows wider dynamic flow range for improved idling
Quieter operation
- Revolutionary disc design resists build up deposits which can affect fuel flow
- No Fuel leakage for quicker starts
- Compatible with alternative fuels (i.e. E85, Methanol)
- Grease supplied to lubricate o-rings prior to installation
Static Flow lb/hr (n-Heptane): |
160 |
Static Flow cc/min: |
1680 |
Coil Resistance Ohms: |
2 |
Peak/Hold Current Amps: |
4/2 |
Spray Pattern: |
3-Prong Cone |
Connector Type: |
Minitimer |
O-ring Type: |
Viton |
E85 Compatible: |
Yes |
Methanol Compatible: |
Yes |
Weight (non-shipping): |
.20lbs |
Test Pressure PSI/KPa: |
43.5/300 |
Test Solvent: |
Heptane |
|
|
Contact Us Now to Speak with one of our Professionals in High Performance!
PHONE: (586) 294-4404
FACEBOOK: @FullThrottleSpeed
E-MAIL: steve@fullthrottlespeed.com